Lock pick and decoder 2 in 1 for Toyota and Lexus.
Designed for opening and decoding the car lock cylinder in one operation.
- Tensioning tool was specially designed for said lock
- through the through holes in the profile, you can access individual sections
- After opening the lock can be directly decoded
- Tension Tool, lockpick and decoder in one tool
Altezza, (1999 Onwards)
ES300, (1998 To 2004)
GS300, (1998 Onwards)
GS400, (1998 Onwards)
GS430, (2001 Onwards)
GX470, (2003 Onwards)
IS200, (1999 Onwards)
IS300, (2001 Onwards)
LS400, (1999 To 2005)
RX300, (1999 Onwards)
SC300, (1998 Onwards)
SC400, (1998 Onwards)
Avalon Xl, (2005 Onwards)
Avalon Xls, (2005 Onwards)
Aygo, (2005 Onwards)
Progress, Nc300 (1997 To 2003)
These locks have five plate positions, and three levels of slicing depth. The cutting depth levels are numbered: 1, 3 и 5. The first cutting level (Plate #1) is the deepest, the third cutting level (Plate #5) is the shallowest. The plates in these locks are divided, each into two half-secrets, each of which works on its own half of the key. Therefore, we divide the lock into “A” and “B” sides for ease of opening and decoding.
The process of opening these locks is in two steps:
After the full secrecy combination is set, the lock turns about 45 degrees and becomes locked again, this is part of the half secrets fall into the neighboring shaft (if we turn the lock in a clockwise direction, then these are the half secrets of side “A”, if counterclockwise, then these are the half secrets of side “B”). To open the lock completely, we need to re-dial the combination of half secrets of the side that entered the lock.
Returning the lock core to its original position also requires repeating the second opening step.
This tool has four styli for reading, the plates are decoded in the same direction in which they are squeezed during the opening process.